Hey everyone, Phil from 3DPUK TECH CHANNEL. In this video I review the FLsun T1 Pro Delta printer (the Pro version of the T1), and I’ll be honest—having never owned a Delta before, I feel like I’ve been missing out. I cover the overall look and build, key specs, the UI, and then I run a bunch of real prints to see if the “hyper fast” claims actually hold up. Setup was straightforward with a detailed manual, although there are a couple of fiddly bits around the toolhead springs, and the whole unit is a big, heavy box (around 20–22kg), so plan where it’s going because it’s tall. What blew me away was speed without the quality falling apart. It’s rated up to 1000mm/s with 30,000 acceleration, and while you won’t live at 1000 all day, I was seeing up to around 800mm/s on parts of prints and it still looked clean. I show prints like an 18-minute Benchy, a few SD card models, and some larger display pieces (including ones from Bugman140 on Printables). My main negatives: the parts/hotend blower is loud, the bed takes a bit to heat, the internal spool holder isn’t my favourite (can tangle), and the built-in camera doesn’t cover much height. Overall though—auto levelling, runout detection, power loss resume, clean touchscreen UI—this one gets a definite thumbs up from me.