Build an LED Strip Logo with the Enttec OCTO Mk2

I used the NEW OCTO Mk2 to control 2,000 LED Pixels for our new Church Stage Design. This was a crazy project, so let me know you how you can build this for yourself. Erics Video! Laser Cutter and more: https://youtu.be/IP475N_llis?si=NWvZk2MM8fclGr0f Purchase the Enttec OCTO Mk2: https://amzn.to/3SKhf8L (Affiliate Link) I'd love to answer your Questions or hear your feedback on this video. Leave a Comment, or Send me an email! CrazyAmazingNathan@gmail.com Resources: Did you know? I offer Personalized Training, Production Consulting/ Coaching. All the info can be found at www.CrazyAmazingDesigns.com/production-consulting-training *Quickly set up a new computer with my ProPresenter 7 Template. Includes Multi-view, +Pre-Built Looks, Themes, Sermon Lower Thirds, and Macros to control it. https://www.crazyamazingdesigns.com/shop/p/propresenter-7-setup-template 00:00 - Stage Design Build for Youth Retreat 00:50 - Using the 3D Model to Laser Cut the LOGO 01:14 - NEW Room Design in Fusion 360 01:50 - A Look at the Final Design 02:43 - Octo Mk2 Network Control Setup 03:03 - I'm Unable to Connect to the OCTO Web Interface: 05:45 - Using Enttec EMU to find devices on the Network 07:00 - Updating Settings on the OCTO Web Interface 07:55 - Connecting OCTO to the Building Network 08:43 - Reset OCTO to Factory Settings 09:41 - Crazy Amazing Productions 10:37 - Wiring and Soldering LED Pixels to build a Stage Design 15:21 - Voltage and Power 16:03 - Using large Wire breaks LEDs, I used 24AWG Stranded Wire 16:55 - Control with Enttec ELM and Resolume Arena. 17:24 - 8 Universe License Included with the OCTO 17:36 - Subscribe and Thanks for Watching!