What’s going on, guys—this video is all about installing our 2019-2025 RAV4 Elevate Decal Kit. I walk you through how I prep the panel, trim the decal correctly (we ship them square on purpose), and then lay it out on the front door so the design follows that upper rocker/body line and sweeps up toward the rear. The Elevate kit is the one with the three notable stripes that taper down into a sharp point—built to make the RAV4 look like it’s moving even when it’s parked. I show two possible placement locations: the main “advertised” lower position (top of the rocker area) and an alternate higher body-line option if you want to get creative—just know some sections can run into tighter areas. I also give you the measurements I used to lock it in straight (like pulling 11 1/4" up from the bottom of the door jamb, and checking that line at about 21"). From there I split the install into sections, tack it, squeegee from the middle out, trim at the door gaps, tuck the edges, and then post-heat everything to 185°F so it sticks long-term. Do it in a clean space around 70°F—too hot and the vinyl gets gooey and won’t float right.