In this video I take a close-up look at the Ampace P600, a 600 watt pure sine wave inverter power station with a 584Wh lithium-ion battery. I walk through the front panel and show you what you actually get in the box: the manual, a car charging cable, and the AC-to-DC power brick. Up front you’ve got an LED light panel, a display, 12V outputs (car port plus barrel plugs), three USB outputs including a 60W USB-C PD port, and the AC outlet with its own power button. I also point out two “options” Ampace advertises—jump start and extended battery—but those accessories are not included. Then I run real tests. I charge it three ways (car, 100W solar, and the wall brick) and show the input wattage on the display, which was roughly in the 70–95W range depending on the source. For discharge, I run a small heater at about 490W and time it: I got 54 minutes before it shut off on low battery, which works out to about 75.5% usable efficiency based on my math. I also test the DC car port with a small compressor, USB charging, overload protection with two heaters (it trips and recovers properly), and I demo the LED panel brightness plus strobe and SOS modes.