The Ultimate Solution for Controlling Smart Bulbs — Shelly 1 Mini Gen4

In this video we'll take a look at my solution for controlling smart bulbs with normal light switches! No more messing around with smart remotes and light switches that need to be kept switched on - with this solution your regular light switches can control the smart bulbs and even trigger scenes while automatically falling back to working like regular light switches if your smart bulbs fail or Home Assistant goes down! Buy hardware used in this video on Amazon (Affiliate): - Shelly 1 Mini Gen4: https://geni.us/lI1Q - Kewtech KT1780 Voltage Detector (for Safe Isolation): https://geni.us/nbNZ Shelly script used in this video: https://gist.github.com/camerongray1515/65da62bc278a5ceee4e0316ea1e194e5 https://www.camerongray.me/ https://instagram.com/camerongray1515 https://bsky.app/profile/camerongray.me Chapters: 00:00 - Introduction 00:46 - The Problem 03:31 - The Solution 07:48 - Hardware Tour - Shelly 1 Mini Gen4 10:14 - Software Setup 18:28 - Lighting Circuit Wiring - "2 Plate" Method 21:38 - Lighting Circuit Wiring - "3 Plate" Method 25:47 - "2 Plate" Method Continued 27:47 - Installing the Shelly 33:12 - Using Retractive Switches 37:34 - An Alternative Installation Method 42:04 - Installing in my Living Room 49:08 - Conclusion *AFFILIATE LINKS NOTICE:* Product links under this video marked “(Affiliate)” are affiliate links where I may receive a small commission on qualifying sales. Affiliate programs that I am a member of include, _but are not limited to:_ Amazon Associates, eBay Partner Network and AliExpress Affiliates. As an Amazon Associate I earn from qualifying purchases. Purchasing through these affiliate links will not cost you any more money, however the commission earned significantly helps fund the production of videos on my channel.