Yo, what’s going on, Valeras Vanguards—this tutorial is all about how I trigger and use samples on the DDJ-FLX10 using rekordbox DJ (version 6.0 or above). I walk you through the sampler panel inside the software first: where the sample banks live, how many slots you actually get (8 or 16 visible, up to 32 total across tabs), and what typically comes “organic” with rekordbox—your classic siren, horn, and noise. Then I show you my exact workflow for loading your own sounds: drag-and-drop drum loops, top loops, joke/punchline FX, and even DJ drops straight into the sample slots. After that, I move to the FLX10 hardware and demonstrate how to actually perform with those samples live using Pad Mode > Sampler (fourth button from the left). I break down how to tell which slots are loaded (colored pads) vs empty (blank), and I stress the most important part: timing. If you’re not counting and triggering on beat, the sampler will expose you fast. I also show the difference between one-shot play mode vs loop mode, how to adjust volume/gain, how sync/master tempo affects your samples, and why you need to learn the layout—because some buttons you think are “play” are actually eject, and that can wreck your flow mid-set.