Building a 2 by 4 Foot Cedar Picket Planter Box

Thanks for watching and please consider subscribing to my channel. My microphone died and there are some portions of the video with low audio. I checked the Closed Captions (CC) and they did pick up most of the hard to hear audio. Cut List: 4 Pickets cut at 46 and 23 inches for sides. 3 Pickets cut at 23 inches 3 times for bottom. 2 Pickets ripped 1.75 inches wide into thirds for the legs and top trim. From these, cut 10 pieces 16 inches long for the legs. The top trim will vary slightly depending on the width of your wood, but should be about 47.5 inches and 25 5/8 inches. You should have one strip left from the 6 rip cuts, use it to rip 2 strips 43 inches long by 5/8 inch wide for the bottom supports. Any questions, just hit me up in the comments. Amazon Affiliate Links: I will earn a small commission of any sales made thru these links at no extra cost to you. BUCKTOOL 5.0A Belt Disc Sander 4 in x 36 in Belt and 6 in Disc Sander with 3/4HP Direct-drive Motor: https://amzn.to/4ldLIda My new Floor Mat 70x24 (best recent shop upgrade): https://amzn.to/3Mu0VKq FastCap PSSR-16 16 Foot Pro Carpenter Standard Reverse Measuring Tape: https://amzn.to/4tA0FKy STEALTH 20 Gallon Air Compressor, Ultra Quiet: https://amzn.to/4apTZ96 Hybrid Lead-in Air Hose 1/4 In. x 10 ft: https://amzn.to/4rjgNi6 Lavazza Espresso Whole Bean Coffee: (Yes, I would die without this) https://amzn.to/4rOdkHV meite 18 Gauge Brad Nails 1-Inch: https://amzn.to/4kEY3XW Titebond III Ultimate Wood Glue, 1-Gallon: https://amzn.to/4audXj7 Milescraft Glue Mate 15oz. Wood Glue Bottle: https://amzn.to/4rQb1nX