Tapo HUB H200 Not Detected? Fix It Fast (Step-by-Step)

Tapo Smart Hub H200 Not Detected? Not Found in the Network? Fix It Fast Is your Tapo Smart Hub H200 not showing up in the Tapo app? Or maybe your Tapo camera (like the C615F) can't find the hub for local storage? You aren't alone! In this video, I reveal the #1 hidden reason for connection failures: Network Mismatch. 👉 Get the Hub 200: https://amzn.to/4bz9zjn (Amazon Affiliate Link) Most people think their hardware is broken, but the fix is actually a simple network adjustment. I’ll show you how to identify if your hub and camera are on different IP subnets (like 192.168.x.x vs 10.0.x.x) and how to sync them so you can finally record to your hub. In this video, you will learn: The "IP Check": How to find the IP addresses of your Tapo Hub and Camera to see if they are on the same network. The Repeater Trap: Why connecting to a Wi-Fi repeater might be blocking your camera from seeing the hub. Step-by-Step Reset: How to partially reset your camera without losing all your settings just to update the Wi-Fi. Final Setup: Connecting your Tapo C615F (or other models) to the H200 Hub for local storage and Wi-Fi backup. 🛠️ Steps Mentioned in the Video: Check Device Info in the Tapo App for both devices. Verify if the IP addresses belong to the same router gateway. Remove/Reset the camera to switch it to the correct Wi-Fi network. Re-pair via Bluetooth and select the hub's network. Enable Hub Storage in the Storage & Recording settings. If this helped you get your smart home back online, please LIKE the video and SUBSCRIBE for more Tapo troubleshooting! #TapoH200 #TPLinkTapo #SmartHomeFix #TapoCamera #HomeSecurity #TechTroubleshooting #TapoC615F #WiFiFix