Raspberry Pi 5 Test Bench with Stats & RGB Load Monitor, Made On The Carvera Air

I built a custom open-air test bench for the Raspberry Pi 5, complete with an NVMe hat, an OLED stats display, RGB LED indicators, and programmable buttons. It was designed in Fusion 360, built with the Makera Carvera Air, and runs a Python script. This is the ultimate Pi testing and development station! #RaspberryPi5 #CNC #CarveraAir ADDITIONAL INFORMATION --------------------------------------------------- Check out the Carvera Air by Makera - https://makerainc.sjv.io/kOkm00 Use my coupon code below to get $100 off the Carvera or Carvera Air MichaelK100off Once per order, one use per customer Visit my blog for the project write-up - https://www.the-diy-life.com/raspberry-pi-5-test-bench-with-real-time-stats-rgb-load-monitor/ 3D Printable Version - https://makerworld.com/en/models/1501849-raspberry-pi-5-open-air-test-bench PURCHASE LINKS --------------------------------------------------- Raspberry Pi 5 - https://amzn.to/3S7HIxp Pi 5 Active Cooler - https://amzn.to/3SHyzf9 Pi 5 NVMe Hat - https://amzn.to/45NOQqx Pi 5 NVMe Hat Extension Cable - https://amzn.to/3SJeuoP Lexar NM620 NVMe Drive - https://amzn.to/4mUaKi8 M2x10mm Button Head Screws - https://amzn.to/45KmAoK M2.5 Brass Standoffs - https://amzn.to/43S8ajQ M2.5 Button Head Screw Set - https://amzn.to/3TkCrCZ I2C OLED Display - https://amzn.to/4jMgNm5 RGB LED - https://amzn.to/4kvlWQu Tactile Pushbuttons - https://amzn.to/4jZxqel Female Breadboard Jumpers - https://amzn.to/4kAv2M7 Tools & Equipment Used: Makera Cavera Air - https://makerainc.sjv.io/kOkm00 Carvera Air Bits - https://makerainc.sjv.io/ra07QD USB C Screwdriver - https://amzn.to/4jBym8h Bambulab P1S Combo - https://shareasale.com/r.cfm?b=2377905&u=2984228&m=138211&urllink=&afftrack= FNIRSI Soldering Iron - https://amzn.to/43ygt5B Some of the above parts are affiliate links. By purchasing products through the above links, you’ll be supporting this channel, at no additional cost to you. CHAPTERS --------------------------------------------------- 0:00 Intro 0:33 Designing The Test Bench 1:47 Making The Bench Components 4:32 Making The PCB 7:03 Assembling The Bench 7:53 Bench Complete! 9:03 Final Thoughts If you've got any ideas for Raspberry Pi, Arduino, or other Electronics projects or tutorials you'd like to see, let me know in the comments section.