Making A Raspberry Pi Home Assistant Hub Using The Atomstack X20 Pro

In this video, I'm going to use the new Atomstack X20 Pro laser cutter to make a Home Assistant hub to control my smart home devices. The X20 Pro uses a clever quad laser design to achieve 20W of optical cutting power, a first for a consumer-level diode laser. Thanks to Atomstack for providing the X20 Pro for this project, check out their online store through the links below. ADDITIONAL INFORMATION --------------------------------------------------- Visit my blog for the written build & CAD files - https://www.the-diy-life.com/i-made-a-home-assistant-hub-using-the-atomstack-x20-pro/ Get the Atomstack X20 Pro - https://bit.ly/3zXLJwz Smart Home Solver's channel - https://www.youtube.com/c/SmartHomeSolver How to Design a Case in Inkscape - https://youtu.be/Sd9NRY723do PURCHASE LINKS --------------------------------------------------- Raspberry Pi 4B - https://amzn.to/3xJXtQA 32GB Sandisk Ultra MicroSD Card - https://amzn.to/3Qe6ObL Aluminium Heatsink - https://amzn.to/3QGCYwD Conbee II Zigbee Gateway - https://amzn.to/3QDFPq5 M3x8mm Button Head Screws - https://amzn.to/3NOTQPT M3 Nuts - https://amzn.to/3NOTQPT M2.5 Brass Standoffs - https://amzn.to/3zUkRgT M2.5 Nuts - https://amzn.to/3zUkRgT M2.5 Screws - https://amzn.to/3zUkRgT Equipment Used: Atomstack X20 Pro - https://bit.ly/3zXLJwz Electric Screwdriver - https://amzn.to/3aOeDVa Milwaukee Oscillating Multitool - https://amzn.to/3ba0VvY Some of the above parts are affiliate links. By purchasing products through the above links, you’ll be supporting this channel, at no additional cost to you. CHAPTERS --------------------------------------------------- 0:00 Intro 0:55 Unboxing & Setup of the X20 Pro 4:25 Test Cut & Engraving 5:25 Designing the Home Assistant Hub 6:05 Laser Cutting the Housing 7:45 Assembling the Housing 8:45 Using the Atomstack App 9:12 Installing the Hub Components 11:35 Zigbee Gateway 12:44 Boot up & Using the Hub 14:05 Final Thoughts If you've got any ideas for Raspberry Pi, Arduino, or other Electronics projects or tutorials you'd like to see, let me know in the comments section.