I built a WINDOW using TVs

DIY woodworking project using 3 cheap TVs. Brought to us by Squarespace. For 10% off your first purchase, go to: http://squarespace.com/makesomething Making a fake window using three 50-inch TVs and basic tools. I start by placing the TVs together on a plywood base and drill holes according to the TVs' mounting screw locations. To hold the TVs, I construct a frame from Baltic birch plywood, reinforced with butt joints and pocket hole screws. The central plywood piece is inserted into the frame through rabbets that I cut using a track saw. I use a French cleat system to wall-mount and add curtains for a window effect. I also created a box to conceal all the wiring and electronics. Finally, I use a video wall controller to make the three vertical TVs work as one. This creates a realistic window that brings the illusion of the outdoors into the room. Join the Make Something Patreon for weekly behind the scenes and private Discord access: https://www.patreon.com/picciuto ★ TOOLS / SUPPLIES USED IN THIS PROJECT★ (Affiliate Links) Televisions Used: https://amzn.to/3YiOYZH Wall Controller That Works Horizontal and Verticle (look on eBay): https://amzn.to/3DnodcT Cheaper Wall Controller That Only Works Vertically: https://amzn.to/44XdsJI HDMI Adapter that Works Great on PC but doesn't do Vertical on Mac: https://amzn.to/46SfjBs AppleTV: https://amzn.to/3O7hBnA Audio Sound Bar: https://amzn.to/44CvIZ9 Track Saw (Cheaper ones work just as well): https://amzn.to/3KocY6t T-Square: https://amzn.to/3q0qh7n Hand Drill: https://amzn.to/37Ca4fx Pocket Hole Jig: https://amzn.to/3s1Wiua Iron on Edge Banding: https://amzn.to/3q3CjNl Spray Finish: https://amzn.to/3Y4COmX Home Theater Fan: https://amzn.to/43x6biZ Table Saw: http://amzn.to/2E89suw Yellow Push Block: https://amzn.to/347PTUB Miter Saw: https://amzn.to/43GdLZ5 Jigsaw: https://amzn.to/3BXf62C Drill Press: https://amzn.to/3IRUMll Merch, books and plans: https://makesomething.com #woodworking