UPDATE: See what the table looks like 2 Years later and what needed to be done. https://youtu.be/tno5ig-zT9Y I wanted to try making a concrete counter top and I wanted a gas fire table for the backyard, so I decided to combine the two ideas. If you want detailed instructions on how to pour a concrete counter top watch this video, It's great and what I followed to make mine. https://youtu.be/T7mYB6x68DY Bookmarks: Step 1: Building the Mold: 0:00 Pouring: 2:30 Removing the mold: 6:00 Step 2: Building the burner cover: 7:12 Step 3: Building the Base: 10:11 Step 4: Finishing he surfaces: 15:36 Reveal: 18:55 Products used: The concrete that was used is Rapid Set Mortar Mix for Home Depot https://www.homedepot.ca/product/rapid-set-55-lb-mortar-mix/1000779604 The additive was Rapid Set Flow control form Home Depot, It's needed to turn the mix into liquid for pouring https://www.homedepot.ca/product/rapid-set-flow-control-60-g/1000778569 Wood used us Cedar deck boards The burner was found at a discount auction but search for "Fire Table Insert" and you should be able to find something near you. For example https://www.homedepot.ca/product/paramount-paramount-round-convertible-burner-black-pan/1001534127 Notes: Music from www.Bensound.com A few things I didn't film in the build process: One was filing the edges of the mold with silicon, you can see just before I pour the concrete all the corners of the mold are black, that's the silicon. The other is placing rebar in the concrete. There is one 2 foot long piece in the middle of each side. I'm not sure if the rebar was needed but decided to add it due to the hole in the middle. I actually almost forgot to add it and when I remembered the mix was starting to firm up so it was a bit of work to get them in, this is why the surface is smooth after pouring and when it is shown curing it's not as smooth :) Also I forgot to vibrate the mold after pouring to remove air bubbles so there were quite a few very small ones, but the grout filled in any of them and it adds to the overall texture quite nice.

Revopoint MetroX Pro: Can It Reverse Engineer Real Parts?
243 views

Can the Hanboost C1 Replace a Normal Knife?
1.4K views

Multi-Filament 3D Printed Shoes — Did It Work?
184.1K views

Real Shop Test: Can the LaserPecker LX2 Handle Real Projects?
1.2K views

3D Print Seams Showing? Here’s Why It Keeps Happening
34.8K views

Resin 3D Printing Looks Amazing… But Is It Worth It?
3.9K views