1st transmission ATF 3.1 DRAIN AND FILL 2024 Honda Ridgeline @ 11,000 miles. 4 quarts, easy DIY!

https://amzn.to/4dOye49 You will need a total of 4 quarts Honda ATF 3.1 https://amzn.to/4jEjMwF 8 mm hex set tools https://amzn.to/45InAd3 Fluid transfer pump, slippery Pete In this video, I show you how I did my first drain and fill ATF fluid 3.1. Only 4 quarts needed. I’ve done this on my 2023 and now I’m showing you how I do it on my 2024 it’s the exact same process. ⸻ 🛠️ Tools & Materials Needed • Honda ATF Type 3.1 Fluid: Approximately 3.8-4 quarts for a single drain and fill. • 8mm hex (Allen) socket: For removing the fill and drain plugs. • 3/8” drive ratchet and extension: To reach and turn the hex socket. • Torque wrench: To ensure proper tightening of plugs. • funnel: For adding new ATF. • Drain pan: To catch old fluid. • New crush washers: For both fill and drain plugs (recommended). • Gloves and safety glasses: For personal protection. • Jack and jack stands or ramps: To safely elevate the vehicle.   ⸻ 🔧 Step-by-Step Instructions 1. Warm Up the Transmission: Drive the vehicle for about 10–15 minutes to bring the transmission fluid to operating temperature. 2. Elevate the Vehicle: Park on a level surface and use ramps or a jack and jack stands to lift the vehicle safely. 3. Locate the Transmission Plugs: Underneath the vehicle, identify the transmission drain plug and the fill plug. The fill plug is typically located on the top in engine transmission housing, while the drain plug is at the bottom. 4. Remove the Fill Plug First: Using the 8mm hex socket and ratchet, remove the fill plug. This ensures that the fill plug can be removed and allows air to enter, facilitating smoother drainage. 5. Drain the Old Fluid: Place the drain pan beneath the drain plug. Remove the drain plug using the 8mm hex socket and ratchet. Allow the old fluid to drain completely. 6. Inspect and Clean the Drain Plug: Clean any debris or metal shavings from the drain plug. 7. Reinstall the Drain Plug: Replace the crush washer if you have a new one. Reinstall the drain plug and torque it to the manufacturer’s specification (typically around 35 lb-ft, but consult your owner’s manual for the exact value). 8. Add New ATF: Using the funnel add new Honda ATF Type 3.1 fluid through the fill hole 3.8 quarts 9. Reinstall the Fill Plug: Replace the crush washer if you have a new one. Reinstall the fill plug and torque it to the manufacturer’s specification. 10. Test Drive: Drive the vehicle for a short distance to ensure there are no leaks and that the transmission operates smoothly. ⸻ 🔁 Maintenance Interval For the 2024 Honda Ridgeline, it’s advisable to perform a transmission fluid change every 30,000 to 60,000 miles, especially under severe driving conditions such as towing, frequent short trips, or driving in extreme temperatures. Regular maintenance helps ensure optimal transmission performance and longevity. As an amazon associate I may earn on qualifying purchases